the resonator is a separate part of the exhaust system not part of the muffler it is to change the tone of an engine sound some are mounted before the muffler and some after the muffler if you really want to remove it cut it off with a sawsall or chain cutter and weld in a piece of pipe or look at a aftermarket exhaust catalog many replacement pipes omit resonator's.
how do i replace the exaust resinator on a 92 geo storm 1.6 liter sohc
Are you trying to remove the exhaust manifold,the muffler,or just the line running from the manifold connection to the muffler?
Yes
Hacksaw
remove the muffler and add a loudener
No, it is for noise only.
remove muffler
Remove the muffler (don't remove the exhaust pipe or the muffler joint band, just twist the muffler off). Remove the caliper housing. Remove the brake pads. Twist the caliper back into the body (large screwdriver or tire iron twisting to the right and pushing at the same time). Install new pads (making sure that they seat right. Re-Install the caliper housing. Re-Install the muffler.
Remove a muffler.
remove the muffler and add a loudener
no - you'll just earn a ticket for noise
Jack up the bike, remove the right side saddlebag, loosen the exhaust clamp at the front of the right muffler and the two bolts supporting the rear of the muffler on the saddlebag support, remove the pull-off muffler on the right side, remove the rear brake caliper, loosen and remove rear axle while supporting the wheel, note location of spacers....move wheel ahead, slip drive belt off and remove wheel assembly