The brake light bald can be accessed through the trunk of the car. Remove the rear tail light cover to access the brake light bulb.
How do you remove the brake light cover on a ford focus
You can access the rear brake light from the cargo compartment. Remove the brake light connector. Take hold of the light bulb, push in and turn at the same time, to remove. Reverse the process to install the new brake light bulb.
remove bulb from in side the boot
Remove screws on either end of light housing. Remove brake light. Remove bulb. Using a cloth, place new bulb in socket. Replace brake light. Attach screws. bulb cost approx. $2.00 for a two pack of bulbs, beats having the dealer do it and charge you an arm and a leg :)
In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
Remove the Phillips screws holding the lens in place, remove the lens, push bulb into socket and rotate counter-clockwise, reverse procedure to install. There are three light bulbs when the brake light column is taken out. If just my brake light is out, which bulb needs to be replaced?
If you can't get to the back of the light through the trunk, you have to remove the light to change the bulb from the rear.
Open the truck and remove the two fasteners (left or right side) that secure the bungee net. This will allow the carpet liner to be pulled forward to access the brake/running light bulb. Twist the bulb socket to remove the bulb.
Unscrew the light from inside the van and remove the light from the outside
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
To replace the tail light bulb, open the tailgate and on the inside there is two little bolts. Take those out and the tail light should slide out, just turn the bulb holder and it comes out.