There are 2 bolts under the louvered part of the fender. You have to remove those 2 bolts to remove that small part of the fender then the battery slides out. Yes you have to remove the bolts but you also have to loosen off the torx screws in the wheel well. On my 85 'Vette, there is one 10MM bolt on the top which must be removed, also one below in the crack which only needs loosening, the fender is slotted there. Yes the 3 torx in wheel well come out and the whole thing slides out towards you.
To replace the battery on a 1979 Corvette, disconnect the battery cables using the proper tool. Remove the bar that holds the battery in place and pull out the battery. Place the new battery in and reconnect the cables.
Remove the lower panel from left fender .
it is behind the battery on the fire wall.
will a 1985 corvette hood fit a 1993 corvette
Start by removing the ground cable first(negative). Then remove the positive cable. At the base of the battery is a hold down clamp, held in by one bolt. Remove this and the battery will lift right out.
Open hatch behind drivers seat......remove battery cables.....remove battery hold down clamp at lower back flange of battery...pull out battery....replace in reverse order.
The coil is located in the top part of the distbutor cap
You need to remove the small vented side panel. or at least remove the 3 screws from the wheel well and the one on the top of the panel. Then pull the panel out enought to remove the battery
Remove the positive cable from your 1975 Chevrolet Corvette battery. Remove the two cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the positive cable from your 1995 Chevy Corvette battery. Remove the cables from the front of your old starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
just like any other battery nothing special disconnect the terminals, remove the battery and put new one in
get a lug lock kit at any auto parts store!!