Put key in ignition then push down on the mileage reset and hold it down then whilst holding it down turn ignition round till only ignition lights come on. The spanner or service light will either start flashing or do a count down when it stops that's it reset for its next service in miles then turn ignition off and release the mileage trip. Start engine and light should be off as its reset. I have just saved you money from going to a dealership.
its your service light
transit van dashboard lights flashing on and off and van not starting
you are low in oil and you need a service
Northing to worry about, indicates it time for a service.
turn ignition to position 2..press brake and throttle together for 15 seconds..light will flash..release and switch off...done!
If you mean the orange light showing oil can and spanner hold both foot brake and throttle, turn on ignition and hold for 30 seconds. The light will flash, turn off ignition job done.
Change the pre=heat (glow plug) relay.
this means that your van is due a service.
On my Renaut van it means it is ready for a service. It will come on after a year or a set mileage. As i don't own a transit i can not be 100% sure but I would imagine they would all be the same.
pull out light switch
Ford Transit is a small light weight cargo van which has bee produced since 1965.
Unscrew the light from inside the van and remove the light from the outside