answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you fix the clutch cable on a 1986 Mazda Truck?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Does 86 Honda Prelude have clutch cable?

The 1986 Honda Prelude does not have a clutch cable. The 1986 Prelude has a hydraulic clutch instead of the clutch cable.


How do i adjust clutch on mighty max 1986 Adjusting clutch mighty max 1986?

ive never worked on that truck but it should be a cable clutch. you will have to get under the truck with acouple wrenches. there should be a lever stickout of of the trans by the front of it. there will be a cable hooked to it and there should be 2 nuts near it. break them both free and tighten the other one. tighten the locking nut and boom. be carefull you dont want too much or too little adjustment because you will either be riding the clutch or it wont disengage enough


If the clutch is constantly slipping in a 1986 Mazda 626 DX where and how do you add clutch fluid?

you dont add clutch fluid. If the clutch is slipping that means that you need to buy a new clutch


Where is fuel pump relay on 1986 Mazda B2600 truck?

down by the carb


What is the wheel size on a 1986 Mazda b2000 pickup truck?

The 1986 Mazda B2000 pickup truck has 14"x5.5" rims. The OE tire size is 205/75R14, and 195R14 tires also fit ideally.


1986 Mazda truck clutch pedal goes to floor and stays?

could be your clutch slave. mine was $65 and i put it in myself it was hard to bleed myself i recommend an assistant to help you with that part. it just broke in the driveway no signs of failure prior. have you tried lifting your foot?


Free online Haynes Repair Manual for a 1986 Mazda B2000 truck?

Yes


Where is the cruise control servo located on a Mazda 1986 truck?

to the right of the brake booster


Could you use automatic transmission fluid as 1986 Mazda b2000 clutch fluid?

NO, Break Fluid Only


Where is the engine temperature sensor located on 1986 Mazda b2000 truck?

under the termostat housing.


When you install a clutch in a 1986 Honda prelude does it have a cable that needs to be bled?

If your replacing the clutch you shouldn't need to bleed anything. But you probly should adjust it, I'm prety sure the 86 has a cable clutch, which is easy to adjust. if you happen to have a hydrolic clutch you should bleed it just to make sure.


Will a 1992 Mazda B2200 pick up truck body be compatible with a 1987 Mazda B2200 pick up truck engine?

The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com