0
DON'T USE AN EASYOUT
they're extremely hard which also makes them brittle. The last several times I attempted to use one they cracked or shattered, leaving behind extremely hard pieces of metal that couldn't be drilled out.
If theres anything left sticking out you could try vise grips, or welding a nut to it. Heat and penetrating oil often helps. If theres nothing left, try reverse drills, make sure theyre centered and straight.
Add your answer:
Earn +20 pts
What is the purpose of an exhaust manifold?
The purpose of the exhaust manifold is to connect the exhaust ports on the cylinder head to the exhaust pipe.
Coolant leaking into lower manifold Taurus?
A blown head gasket can allow coolant to see into the manifold, and out the exhaust. A broken piston ring can also cause this problem.
What would cause water to leak out at exhaust manifold and tailpipe at same time?
A broken piston ring is the most common cause of water in the exhaust manifold. A bad valve in the cylinder head can also cause the problem.
What is the torque for an exhaust manifold on a 2001 Kia Sportage?
exhaust manifold to head nuts are 31 ft. lbs.
Chevy impala is making a muffling sound when driving?
Exhaust leak at Exhaust manifold to head gasket or oring at exhaust manifold pipe.
How do you remove a vl commodore head gasket?
Remove the intake manifold, exhaust manifold, and then remove the head.
Where is the exhaust manifold located on a 1991 Ford E-150?
its on the cylinder head. just like any exhaust manifold.
1996 Nissan Pathfinder change exhaust manifold?
What engine???????? You should refer to repair manual if not familiar with auto repair and understand the terminology before attempting Remove nuts holding exhaust manifold to cylinder head & remove nuts/bolts holding exhaust manifold to exhaust pipes Use new exhaust manifold gaskets and install the new manifold securing the manifold to cylinder head (may need to but new nuts and or bolts) by "snugly" tightening manifold to cylinder head if not refering to repair manual
How do you replace exhaust manifold gasket on 1986 K10?
unbolt the head pipe then the manifold.
1999 Villager exhaust leak between manifolds What is the part under that covershield correctly called so it can be ordered?
sell your van the studs for the maniflold are going to break and you most likely will have to replace head Between the exhaust manifold and the head is the manifold gasket. Where the exhaust pipe connects to the exhaust manifold is a manifold doughnut gasket.
How do you know when the head gasket is bad in a impala?
Intake Manifold....smelling radiator fluid fumes in cabin or white smoke in exhaust. Exhaust manifold or cylinder head....smelling burnt oil in cabin or black smoke in exhaust
What causes coolant to leak into the exhaust manifold?
Blown head gasket and/or cracked head.
