it is obd1 so an autozone or advance cannot check it. some shops still have an obd1 scanner tool, you can buy the adapters at the stores above. its pretty pricey to get the adapter tho cause you still need to buy the scanner too. i would take it to a shop unless you know how to jump the ecu to get it to flash(i believe you can do that on nissans too).
you need to check your lights to make sure that the light is not going out!!! A flashing CEL typicly means that there is a misfire.
the check engine light is blinking and my 03 Nissan exterra is running rough
check engine
First fix the problem that caused the light to come on. Then you may be able to reset it by removing the battery cable for 5 minutes. If that does not work, you will need an OBD2 scan tool to reset the light.
I think it means you need to check your engine.
It's below the light silver peice, under the right side of the engine bay.
The check engine light is flashing due to a problem with the emission system. I flashing check engine light usually indicates a random engine misfire.
Yes, may read service engine soon, check engine, .....
how do you turn off the check engine light on a 1995 Nissan maxama i have already disconnected the battery dor 24 hours
no
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
how to reset engine check light on 2009 murano