An AGS-1 fuse is an 1/4" glass 1amp fuse which is used in aircraft.
I use a 30amp buss type fuse and it works great.
if they are all out, check your flasher, it;s a silver tube like thing. it will probably say "BUSS" on it. but the fuse should be under the dash in your fuse box.
check your answer
If it fits you are fine. You are at the same current and the voltage rating is higher.
No, it is not safe to replace a 125V 20A fuse with a 220V 20A fuse. Fuses are designed to protect electrical circuits from overloading, and using a higher voltage fuse could lead to damage or fire hazards in the circuit. Always replace a fuse with the same voltage and amperage rating as the original.
A fused jumper wire is just a wire with or with out alligator clips that has a fuse on it. It can be either buss or blade fuse. You can make one with some parts at autozone or similar parts store.
there called (buss fuses) you cne get them at Napa Auto PArts
Blown fuse? Damaged buss board?
No bus is shorth for No Buss, you are missing a fuse that controls the ignition.
The current would rise until it blows the fuse or breaker and that would produce an arc as the transformer's inductance tries to maintain the current.
Jimmy Buss's birth name is Jim Buss.