how do you replace a transmission pressure control solenoid in a 2003 chevrolet impala
Every 10,000 miles
deal with it buddy
Remove the water supply hose from the top of your 2003 Chevy Monte Carlo thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out. Drop the new thermostat in and reverse the process.
every 10,000 miles
You need only to drain off a couple quarts of coolant to change the thermostat.
do you need to remove dashboard in 2003 chevy impala to replace heater core
To change a thermostat on a 2003 Chevy Impala remove the connectors to the battery, wait for the coolant system to be drained and take out the radiator hose. Remove the thermostat and clean it's component, position the thermostat, put the new gasket on top of the thermostat and put engine oil on the bolts. Attach the radio hose and fill the system with coolant. Put the negative part of the battery cable to the terminal and let the car run for a few minutes before driving.
The 2003 Impala has a 17 gallon fuel tank
Remove the tire and wheel from your 2003 Chevy Impala. Remove the brake assembly spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.
2003
check with your Chevy dealer on that.