Is the stud that needs to be replaced in a drum or on a rotor? In either case, remove the drum or rotor from the vehicle. Take a mallet and some type of pin, and drive the broken stud out of the holder. If you know someone with a press have them do it for you.
The next step is to get a replace ment stud that is the same size as the old one. Take the replacement stud and place it into the hole where the other stud was removed. Take the nut and turn it so the angled side is facing away from the drum or rotor. State the nut onto the bolt, taking care not to cross thread it. Tighten the nut until it pulls the bolt seat into the hole. Remove the nut and reinstall the drum or rotor onto the vehicle.
Trim the wheel behind the studs
How do you change front tire studs on a 1994 Seville sts
HOW DO YOU CHANGE FRONT WHEEL STUDS ON A 1995 CHEVY LUMINA AUTOMOBILE?
if the bolts do not get on then you just have to change the studs
wheel studs? head studs?
Just open the three studs in the center of the wheel and it should come right off.
how do i change the front wheel studs
itsa stupid ugly!
remove wheel. if disk brake, knock studs out with a hammer. insert new studs from rear side of disk. use a spacer and wheel nut to pull stud thru disk until seated. then remove wheel nut and spacer. replace wheel if drum brakes you need to remove the brake drum, then proceed same as for disk brakes
To remove wheel studs from a 2000 Honda Civic the wheel needs to be removed. Taking the wheel hub completely off the vehicle makes the process of removing the studs easier. The studs are pressed in and use of a machine press to remove them is recommended.
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
You have to have the hub pressed out of the knuckle to replace the wheel studs.