first you remove the four bolts out of each front shroud on the gas tank. next you take the two ten millimeter bolts out of the rear side panels. after that you remove the seat and detach the tank from the bike by removing an 8 millimeter screw up by the steering post and a rubber strap at the end of the tank. after that disconnect the fuel line from the left side of the carberater and take the tank out. after removing the tank you can see the top of the motor and then pull the spark plug cap after that insert the tool provided with the owners Manuel and twist the plug out. then when putting the plug in make sure you crush the crush washer on the new spark plug and after that plug you cap on and do all these steps backwards and your set.
by tools
good friggin question
when do you have to change a spark plug and how many miles when do you have to change a spark plug and how many miles
To change the spark plugs in a Chevy Celebrity: 1. Give the spark plug boot a twist to free it up from the spark plug, then pull on the boot to remove the spark plug wire from the spark plug. 2. Use a 5/8" spark plug socket with an extension and ratchet or breaker bar to loosen then remove the spark plug. 3. Set the gap on the new plug to .045" then screw it back into the spark plug hole in the head. Tighten the spark plug and replace the spark plug wire. I change the spark plugs one at a time to keep from getting the spark plug wires on the wrong spark plug.
How do you change the number 2 spark plug on a 2001 nissan maxima?
You won't need a diagram if you change one spark plug wire at a time.
Most snow blowers have the spark plug on top of the motor :to change a spark plug you get a spark plug wrench (take wire cap off the plug) put wrench on spark plug then turn counter clock wise to take it out. To put a new one back in reverse the proses
what is the spark plug clearance for a Mistsubishi Colt.YEAR 2000
Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
Remove the coil on top of the plug, and there is the spark plug.
Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.