The first step is to remove the transmission you can pull it all te way out or just slide it back about 2 feet to do this you will need to remove the shifter from the trans. next remove the bolts that hold the preasure plate to the flywheel the clutch disk is between these 2 items. after removing it sand the flywheel slightly then reinstall the new clutch preasure plate and always replace the throw out bearing which is located in the clutch fork . you will need to align the clutach before trying to stab the transmission back to the motor most clutch kits come with a tool to do this .
Not sure what you're asking about. I have a 1998 S10 standard shift that still has a clutch pedal.
No. The Chevrolet S10 series came out in the 1982 model year.
Yes. With proper maintenance and care.
Yes, there is no reason you should not be able to change the oil by yourself in a 1996 Chevrolet S10.
7/16 or 11mm
you need to remove the transmission then unbolt the clutch from the flywheel.
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
The approximate curb weight of a 1982 Chevrolet S10 v6 standard cab is 3,600 pounds. A modified truck will weight more.
how do you replace hydraulic line on a 1997 s-10
Usually there are 4 nuts holding the clutch and fan on to the water pump shaft. Just pull the nuts, remove the fan clutch and replace it.
You will need to remove the transmission to replace the clutch slave.
change crank sencor