The 2004 Saturn ION has hook-end wiper arms. Look for a little tab where the wiper blade is inserted into the hook, press it and pull wiper blade out of hook. See the wiper blade installation video below for hook-end arms.
To change the wiper blade on a Peugeot 306 unclip the old part from the mount. Take the new wiper blade and slide it into place until it clicks.
The 2008 Saturn vue REAR wiper blade is only available at GM dealerships - it is special and aftermarkets are not available. Thus, when you purchase the wiper blade, ask the dealer for installation instructions. FYI, you can get aftermarket wiper blades for the front wipers - see sources and related links below.
How do you change wiper arms assembly for Saturn ion?Read more: How_do_you_change_wiper_arms_assembly_for_Saturn_ion
How to remove the wiper motor on a 2002 Saturn sc1
You can change the wiper blades by removing the retaining clip to the wiper blade arm. The wiper blade will come off and can be replaced.
I am going with the assumption that question is "how do you change the wiper blade (blade and frame)", not "how do you change the rubber blade (wiper refill)", and not "how do you change the wiper arm". Wiper Blade = The wiper frame that attaches to the wiper arm including the rubber blade. 1. Step 1 is to be sure you get the right replacement wiper blades. The 1992 Ford F-Series Pickup (including the F-350) takes 18" wiper blades on both sides front.
That rear wiper blade is only available at the dealer (there are no aftermarkets available). So, when you go to purchase the wiper blade, ask them for replacement instructions.
The way to change a rear wiper blade on a kai sedona would be to take the vehicle to an auto mechanic or an auto body shop and let them change the wiper blades on the vehicle.
get a mechanic
It will depend on if your rear wiper looks like a traditional wiper blade or if it looks like a newer, fancier wiper blade. If traditional looking then watch "hook arm" video. If a newer-style wiper blade then watch "xx-E video".
The Toyota Highlander rear wiper blade is held in place by two retaining clips. Remove the retaining clips and the wiper blade will slide out.