By locating the allum bolt under the Power Steering pump and loosening it, adjust the tensioner (slider) then retighten the bolt, job done.
Chat with our AI personalities
u do not adjust belt tensioner if belt is loose, u need to replace belt as tensioner works automatically
You can adjust the belt tensioner by loosening the tensioner bolt. When the tensioner bolt is loose the tensioner pulley can move back and fourth.
To adjust a belt properly, first locate the belt tensioner and use a wrench to loosen it. Then, adjust the belt tension by moving the tensioner until the belt has the right amount of tension. Finally, tighten the tensioner back up and make sure the belt is aligned properly on the pulleys.
The belt tensioner is self-adjusting.
There is no way to adjust the belt tensioner, if it's not keeping enough tension on the belt the complete tensioner itself will need replaced.
There is no adjustment on the spring / Tensioner. You either have the wrong belt are the tensioner itself is bad. Replace tensioner are belt.
you dont,the tensioner tightens the belt up.if belt sqeals get new belt or tensioner! on 3.1v6,
The water pump is the tensioner for the timing belt. if you need to adjust it, replace it.
You dont! The belt is self adjusting with the belt tensioner. Check the tensioner for failure or damage if your belt is loose good luck
You cannot adjust the belt tension on a 2000 dodge grand caravan. This vehicle is equipped with an automatic tensioner. If tensioner is frozen or will not hold the belt tight, it must be replaced.
Done automatically by belt tensioner
Should have a spring loaded belt tensioner