answersLogoWhite

0


Best Answer

If your have the 3.5L engine (24 valve) the # 2,4, & 6 are in the back- under the ignition coil on plug. The # 1,3, & 5 are beneath the intake manifold plenum which has to be removed ( but not the intake manifold). Remove the top cover (just pops off) that says 3.5L 24Valve on it. Remove six long screws in the rear #10 hex heads, and one of the same by the alternator. Disconnect the sensors connectors and unscrew the EGR tube in the back. Disconnect the vacuum hoses and alternator top mount plate. Remove the oil fill tube, and the two screws that anchor the front side of the plenum to the exhaust manifold. Carefully lift up and pull towards the front of the engine making sure you have removed ALL of the attachments to the plenum (there is a black arm on the vacuum modulator that on the rear right side that needs to be popped off gently). Once removed, the 3 coils are easily removed, thou I would strongly recommend replacing the coils also ($38 each at Auto Zone) if you experiencing a misfire. You will also need the plenum gasket ($12) once the plenum is removed or you have vacuum leaks.

Good luck!!

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you Change spark plugs on a pacifica?
Write your answer...
Submit
Still have questions?
magnify glass
imp