0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you put a timing belt on a 88' 302?
Ford V-8 engines do not have timing belts.
How can you put your timing belt your 1998 ford expedition motor5.04?
That engine doesn't use a timing belt.
Where are the timing marks on a 1992 Ford Laser?
ford doesnt put timing marks on anything. u need a special cam gear alignment tool
How do you put a timing chain on a 1995 Ford Escape XLT 2.3?
There is no such thing as a 1995 Ford Escape!
1990 camaro rs v6 and you had replaced the distributor and messed up the timing how can you fix it?
well first you need to get the timing close enough to crank then put a timing light on it and bring timing to top dead center.. which is the second mark on the timing chain cover.. there will be a mark on the harmonic balancer line that mark up with the second mark on the gauge on the timing chain cover.. and should be fine
How do you put a Suzuki Reno timing mark?
Align the timing marks on the camshaft gears to the notches on the camshaft cover, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear. 38. Align the mark on the crankshaft gear with the notch at the bottom of the rear timing belt cover.
Why is the timing mark on a 1979 Chevy 350 on the opposite side from your timing grid but the engine runs fine?
some one put the wrong balancer on the crank. or put it on inside out...
Need timing for 1998 5.4 ford engine?
if on a 98 f 150 v8 5.4 , if you put the 1st link on mark in stead of in center of 2 marks and the sproket looks at 12 and or 11 will it be out of timming
Ford expadition and put on a new head gasket now you have no horse power?
check your timing
How do you set the timing on a 1994 Ford Aspire?
pull your timing belt cover/#1 plug/closest to the cover/ adj so piston 1 is at tdc crank timing mark should be in between pointer/ adj cam gear 1 mark at top with valve cover on 1 mark at right with top of block looks like L shape /put on belt and tighten tensioner/rotate dist to #1 caution dont hit pistons with valves when adj crank or cam for aligning timing marks good luck,
How can you do timing with no mark?
the only way to determine where tdc is to do the timing is to put a dial indicator on top of number 1 piston, can be done with the head on depending on what engine it is
What is the first name of the first satellite put into orbit by the us?
The first satellite put into orbit by the U.S. was called Explorer 1.
