answersLogoWhite

0


Best Answer

Pull on it, its just stuck.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do I remove the spark plug wire on 3300 Buick engine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace spark plug wires on a 3300 oldmobile engine?

To replace spark plug wires on a 3300 Oldsmobile engine, open the hood and remove the wires from the end of the engine. The number of spark plug wires most often corresponds to the number of cylinders your engine has.


How do you replace wires spark plugs Buick century 1992 v 6 3300?

how to replace spark plugs wires 1992 buick century v 6 3300 stationwagon


Having timing chain problems for a 1990 Buick century 3300 engine?

How do the timinh marks line up for buick ventury 1990 with a 6cyl 3300 engine


Ignition module location on 1990 Buick Century?

You will find the ICM directly below the coils. Just remove the coils and you will be able to remove it. This is on a 1990 Buick Century V6 3300 engine. If you have a different engine I cannot confirm the location.


How do you tell what motor is in a 92 Buick Century?

Open hood look at engine, should say 3300 or 3100 or something, then that means it'd be 3.3 or 3.1 Then count the spark plugs or spark wire.


Where are the sparks plugs on a 93 Buick Century V6 3300?

There's a different question here with a good answer. (Search for spark plugs on a 93 Buick Century.) Briefly, there are three on the front of the engine (near the cylinders themselves), and three more in back.


Where is the starter located on a 1993 buick century v6 3300?

The starter and solenoid are mounted together on the bottom front side of the engine


Will a 1994 Buick Century 3.1 engine replace a 1993 Buick Century 3.3 engine?

Simple answer is no. They use a completely different engine harness. It can be done, but you have to change all the wiring under the hood. The 3300 engine is probly the better engine, but the 3100 engine is a good motor, but are prone to more problems.


Is a 1994 Buick century 3.1 engine compatible to bolt up to a 1993 Buick 3.3 century?

Simple answer is no. They use a completely different engine harness. It can be done, but you have to change all the wiring under the hood. The 3300 engine is probly the better engine, but the 3100 engine is a good motor, but are prone to more problems.


What are some possible problems on a 1993 Buick Skylark 3300 that can allow the engine to rotate but not start and no trouble codes?

I took it to a shop. It was the crankshaft position sensor.


What is the curb weight of the 2012 Buick Verano?

The curb weight of the 2012 Buick Verano is 3300 lbs..


What is the curb weight of the 2014 Buick Verano?

The curb weight of the 2014 Buick Verano is 3300 lbs..