0
Add your answer:
Earn +20 pts
How do you remove the cam agitator on whirlpool washer?
From: http://www.fixya.com/support/t1942223-one_part_agitator_moves_other_part Remove Dispenser or Cap: Some models of washing machines utilize a fabric softener dispenser that resides on top of the agitator. This dispenser simply snaps onto the top of the agitator. Other styles utilize a decorative cap. To remove the dispenser, simply grab it and firmly pull up. To remove the agitator cap, insert a small flat-head screw driver into the seam between the agitator cap and the upper agitator (mover). Use a twisting or prying action to pop the cap off of the agitator. Remove Internal Debris Cap: Inside the agitator you will see a cap with a raised handle, much like that of your automobile. Simply reach into the agitator and twist the cap while pulling up. This will remove the cap and its o-ring. Remove Agitator Stud: When looking into the agitator assembly, you will notice a single nut in the center of the agitator. Use a socket kit or nut driver to remove this bolt (agitator stud). Remove the Upper Agitator (Mover): With the bolt removed you should be able to remove the upper half of the agitator (mover) by simply pulling up. Sometimes pulling up will actually remove the whole agitator assembly. If this happens, place the Lower Agitator on the floor and stand on the flat lip. Then Pull up to separate the Upper Agitator (mover) from the Lower Agitator. Remove the Cam and Clutch Dogs: When you remove the upper agitator (mover) it contains the cam and clutch dogs. Tun the assembly upside down. The cam and dogs should then come out.
How do you remove the agitator of a speed queen washer?
To remove the agitator of a Speed Queen washer, first, unplug the machine. Then, remove the fabric softener dispenser on top of the agitator and bolt or nut securing it. Next, grasp the bottom of the agitator and pull up firmly to detach it from the drive shaft.
Was Thomas Paine an heroic agitator or a crude traitor?
AGITATOR AGITATOR
How do you remove headlight assembly?
How to remove headlight assembly on 2003 Lexus GX470
How do you remove the ashtry assembly on dashboard on a f-350?
remove the ashtray from the assembly you will then find a screw that needs removed . remove that and the assembly will come right out
How do you remove the headlight assembly on a 2001 Camaro?
How do you remove the headlight assembly on a 2001 camaro?"
How do you remove a rear hub assembly on a 97 avenger?
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.
What is an agitator and how is it used?
An agitator is a device or mechanism to put something into motion by shaking or stirring. There are several different types of agitators, such as manual, a washing machine agitator, and a magnetic agitator.
How do you replace a rear wheel bearing 2001 Prius?
Remove tire, remove brake drum, remove brake assembly housing, remove 4 bolts from back of hub assembly, gently tap to remove hub/bearing assembly.
How is a pulsator different from an agitator in a washing machine?
A pulsator creates water movement by rotating or pulsating to clean clothes gently, making it ideal for delicate fabrics. An agitator, in contrast, uses a central column to move clothes vigorously back and forth to remove dirt and stains from heavier fabrics.
Headlight assembly removal 2002 Honda accord?
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
Why does your Hoover Elite bagless sweeper have suction at the hose yet will not pick up from carpet?
1. You didn't turn on the agitator, 2. The agitator is broken, 3. There is something caught in the agitator 4. The hose is not connected to the agitator.
