Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
Brake caliper needs grease in grooves so it can slide out when brake is released and can slide back in when brakes are applied. Or it could be that the brake pad is broken,you have to get someone that knows what they are doing to pull the wheel off and check it soon or it may heat up the rotor to the point it will crack.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
The answer and dimensions are stamped in the stock brake rotor of your vehicle.
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
how thick should a front rotor on a 2005 envoy be
yes
front brake assembly diagram for a 2006 F150 4X4
More than likely a front or rear brake rotor is out of round. Depending on what model and year vehicle it could be a brake drum out of round also.