I am also looking for parts for a J.C.Higgins 22 cal Model 43. I need the complete bolt assembly!
I HAVE A WARDS WESTER FIELD NO 47A 22 BOLT ACTION, IT WAS MADE BY MOSSBURG
Check the barrel for the makers name.
22/43 = 51%
22 including both 1 and 43. 22 including both 1 and 43. 22 including both 1 and 43. 22 including both 1 and 43.
Sears Roebuck & Co sold the model 43-103.19811 , .22 cal , rimfire , SL / LR , tube feed , bolt action - the rifle was manufactured by Marlin Firearms Co.
Tighten the long bolts to 46 ft/lbs. Tighten the short bolts to 43 ft/lbs. #1 is between cyl 2 and 3 (middle bolt, long), pushrod side. 46 ft/lbs #2 is middle short bolt. 43 ft/lbs #3 is short bolt between cyl 1 & 2 43 ft/lbs #4 is long bolt between cyl 1 & 2 46 ft/lbs #5 is long bolt between 3 & 4 46 ft/lbs #6 is short bolt between 3 & 4 43 ft/lbs #7 is short bolt at front 43 ft/lbs #8 is long bolt at front 46 ft/lbs #9 is long bolt at rear 46 ft/lbs #10 is short bolt at rear 43 ft/lbs "After this, (using torque angle meter) tighten in same sequence another 90 degrees."
22.8372
The Least Common Multiple (LCM) for 22 43 is 946.
The J.C. Higgins Model 43 was manufactured by Marlin Firearms. It is the same as the marlin Model 83 Blackhawk_45 The J.C. Higgins Model 43 was manufactured by Marlin Firearms. It is the same as the marlin Model 83 Blackhawk_45
108
Always start from the center and work your way out. Kind of like in a circular motion but the circle gets bigger & bigger. # Tighten bolt 1 to 63 N·m (46 lb ft). # Tighten bolt 2 to 58 N·m (43 lb ft). # Tighten bolt 3 to 58 N·m (43 lb ft). # Tighten bolt 4 to 63 N·m (46 lb ft). # Tighten bolt 5 to 63 N·m (46 lb ft). # Tighten bolt 6 to 58 N·m (43 lb ft). # Tighten bolt 7 to 58 N·m (43 lb ft). # Tighten bolt 8 to 63 N·m (46 lb ft). # Tighten bolt 9 to 63 N·m (46 lb ft). # Tighten bolt 10 (stud bolt) to 58 N·m (43 lb ft).