The 1986 Honda Prelude does not have a clutch cable. The 1986 Prelude has a hydraulic clutch instead of the clutch cable.
If your replacing the clutch you shouldn't need to bleed anything. But you probly should adjust it, I'm prety sure the 86 has a cable clutch, which is easy to adjust. if you happen to have a hydrolic clutch you should bleed it just to make sure.
I don't know if Nissan is the same as Ford but on my Taurus you have to lift up on the clutch pedal with your foot until you hear it clicking; that's the clutch adjustment mechanism. Try that and see if it works. This guy means if you have a ratcheting adjustment type clutch. I had one on my 86' 5.0 mustang. There are 2 other possible problems... I had a new clutch did same thing, found out the cable had stretched and I had your exact same symptom. Changed the cable, worked fine. Of course if you have a hydraulic clutch like my 96' PU then you are looking at new clutch or slave cylinder.
yes it will
On my 86 2.0l it has a hydrallic clutch and there is no adjustment, but you can check the reservoir to see if there is enough fluid in it.
An 86 Blazer does not use a special type of brake fluid. Standard fluid from any auto parts will work fine.
3-5 Days, assuming 12 hour work days
5 quarts
no...absolutely not, totally different, even the slightest difference would make it not work correctly
15.4 gallons
I Hurd that the 1985 mustang gt top speed was 135mph so the 86 shouldn't be slower
No fluid in the master cylinder