answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Do need the metal gasket back in there?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do you need an adhesive for the gasket on a thermostat?

If both metal surfaces are really smooth and you have a good composite gasket then you may not need it. - If you have a good gasket goo available, it can't hurt. -My favorite is 'Permatex Aviation Form a Gasket' .


Does an exhaust gasket need silicone?

No, the exhaust gases are too hot. Generally a collapsible metal gasket is used on exhaust.


Do you need a gasket when you replace the thermostat?

Yes you need a gasket between the thermostat housing and the engine. Usually a fiber type, should come with the gasket. In a perfect machine, the metal to metal contact would be so exact that there would be no leak even under pressure. This is not the case on most cars. The gasket allows for slight imperfections in this contact area. Even better is a gasket with a little automotive silicone material allowing for a good seal under heat and pressure.


Why torque and then back off and then re torque metal head gasket?

That method results in a more accurate and even torque.


What are gas checks used for in reloading bullets?

They are a sheet metal cup that is pressed on to the back of a lead bullet to hold the pressure better, sort of a gasket on the back.


How do you replace an Air compressor gasket?

There are many gaskets on any machine. Is this an electric compressor? Once you find what gasket it is specifically, you simply need to remove that part, and add a new gasket, then put the part back on...


Where is the thermostat located on a 96 Chevy Lumina 3.1?

the location of the thermostat is under the throttle body.before you put it back on you need to buy some gasket sealer or a gasket for the thermostat


When changing the water pump on a 98 cavalier 2.4 engine does the intake manifold gasket need to be changed?

You shouldn't need to take off the intake manifold at all so, to answer your question, no. However, if it the exhaust manifold you mean, the answer is still no. It should be a multi-layered metal gasket and the only reason to replace any gasket is because it is damaged.


How do you repair a head gasket 1994 Chevy G20 van?

You will need to remove the cylinder head from your 1994 Chevy. Remove the head gasket and clean the surface. Put the new head gasket on and put the cylinder head back to its original position.


How do you get the return from your cooling on your engine were the wye fitting attaches to the motor with a metal to metal beval not to leak once it is pulled ou and pu back in?

purchase a gasket/o-ring designed to fit in that place - your local service shop will be able to supply this. or you can use generic gasket making "goo" as long as you get water safe stuff


How do you change the transmission fluid in a Honda accord and do you need a gasket?

No, do you not need a gasket, don't be ignant.


Does the gasket for a egr valve need any gasket sealant?

no gasket sealant needed. Just original gasket is fine.