It is the fuse for the hazard lights or as they are sometimes called, emergency lights.
The hazard lights are a seprate circuit even though they share the same bulbs. I would first replace the hazard flasher; it simply plugs in. Usually the hazard flasher is located in the interior fuse panel. I hope this helps you. Mark
take out the fuse for indicators. open the passenger door to access the fuse box on the lhs of the facia. the lid unclips and shows embossed icons which identify the fuses. you will have to use hand signals if you drive the car.
The fuse for hazard and signal lights on the Nissan Serena is in the fuse box, bottom row. The flasher fuse for hazard and signal lights is located in the dash just to the left of the radio.
try a fuse or relay.
no fuse the switch is the common fault
Test if your hazard lights work. There are normally two flasher cans in most vehicles. If the hazard lights work, It is likely to be the flasher can that works the indicators is blown and in need of replacement. These will be available for under $50US from most auto parts stores.
bad fuse or hazard switch
Pull the hazard light fuse.
If the bulbs are working then you just need to change te fuse.
my indicators have stopped working checked fuses in fuse box my hazzard lights still work
replace the flasher fuse