yes
Wiki User
∙ 12y agoany quality bar oil will work fine.
yes
Yep. You can run it without the bar and everything. It may leak bar oil though as most pump oil as the motor runs to lube the chain. It may have a tendency to rev higher though so don't squeeze the throttle too much.
There are many mechanic stores and garages where a person can get motor oil changed for a vehicle. An example of a place where motor can be changed is Midas.
Yes, it sure will. Bar oil is not formulated for use in an internal combustion engine and will damage that engine.
No - 2 cycle oil is the only oil you should use in a 2 cycle motor. Because 2 cycle oil is designed to mix with the gas and lube the motor. Your "truck oil" is not the 4 cycle oil will not mix it is designed to just lube in the crank case.
Some Stihl chain saws have an adjuster underneeth the saw to turn up the oiler .
The mix ratio is 50:1, but be sure to use a good 2 cycle oil such as Husqvarna's or Echo's. Do use a motor boat or motorcycle 2 cycle oil. Those are not rated for the small engines like used in the 141 chainsaw. Best bet is to buy the oil at a reliable mower shop.
NO!!!! Absolutely not.
No, because the oil is for cars! :-)
It is called bar and chain oil, and you can get it at any hardware store. It doesn't matter what brand, its all the same. You could honestly use any type of oil, even EVOO(olive oil), but not recommended, it would work tho
Not so sure it is. The manual shows none. If it suffers from reduced flow, the oil pickup may need to be checked for clogging. See link to manual, now a part of Husqvarna.