Sure you can with a bottomless check book but why in the world would you wanna do that?
Yes but it is not worth it. The engines face opposite ways.
yes. both engines are the 4g63. the turbo engines from the 1990-1994 is a 6 bolt 4g63 and the turbo engine from the 1995-1999 is a 7 bolt 4g63.
yep need a dif ecu though
Yes, you can, but there is a chance that you will need to change transmission and everything what is going inside the engine. The problem is that Mitsubishi engine parts from different engines are not compatible (it can be turbo Japanese engine, or non-turbo crysler engine and so on).
Yes you can you will need to get the non-turbo engine, non-t ECU and wire harness. The wire harness and ecu are diffrent between the t and the non t.
No, you can't.
Buy a turbo. Change exaust , change manifold , change air intake, reprogram ecu.
With money, you can do anything you ever dreamed of.
The simple answer is yes. there are two engines in talons, lasers and eclipses. or better known as dsm's. (diamond star motors). there is the 4g63, and the 420a. which both come in turbo and non-turbo models. if you are looking to swap a turbo 4g63 into a non turbo 4g63 shell, the swap is simple. same as if your swapping a turbo 420a into a non turbo 420a shell. now, if your looking to swap a turbo 4g63into a nonturbo 420a or vise versa, you will encounter problems with motor mounts, wiring etc. keep in mind the wiring and ecu's etc will be different on each motor.
not with out alot of work. the most common swap would be a 4g63 turbo 2.9L from a 1993 eclipse, and with that swap you will need: -ecu -tranny -axels -motor mounts and a few others. would prolly be better off buying a new car
the manifold will boltup but you need to get a new jpipe and oil/water lines, you can find all that in a kit on ebat fyi