only adjustment is under dash on the master cly needs free play so it can return throwout bearing, under hood just open slave bleeder screw an close. if the don't cure it then clutch needs to be replaced.
Does the Hydraulic clutch pump brakes alot on 1989 chevy berette gtu 2.8liter 6cyclinder 5speed
It's a hydraulic clutch and can't be adjusted.
no adjustment on the 5speed manual transmission with overdrive. hydraulic clutch
yes if it is a 5 speed
You dont. It is hydraulic. Cannot be adjusted.
If it has a hydraulic clutch, I believe they can not be adjusted. When the pedal travel is no longer acceptable the clutch disc must be replaced.
Its a hydraulic operated clutch, so its auto adjusting. No manual adjustment. If the clutch is slipping, you need a new clutch plate.
clicker on the lever, hydraulic clutches can not be adjusted. If adjustment is needed you need new friction discs. Can you adjust the brake pedal on your car.....NO, they're hydraulic as is the nomad's clutch. this is NOT correct - if you have hydraulic brakes with drums, the pedal can be adjusted by clicking the manual adjuster inside the drums!
you don't. it's hydraulic and, automatically adjusted hydraulically.
Check your hydraulic clutch reservoir to make sure it is full, if it is, it may be bad and need to replace.
Check your firewall, I have seen them break or 'stretch' causing grief for clutch action.
There is NO adjustment. It is adjusted automatically through the hydraulic slave cylinder. Probley time for a NEW clutch kit.