if the car dies when the lights come on then IT IS your alternator. Another way to test this would to be after you start your car take the battery cables off of the battery. if your alternator is good then the car should keep the car running. besides that there could just be a bad connection. if you live near an auto zone or a store of that sort they have machined they can hook up and read the prob inside. if it's nothing the it can reset it also.
Battery and brake light coming on means the Alternator is not charging the battery . It could either mean a bad circuit connection or the alternator is just shot. Have the Alternator checked.
Probably the alternator. Have it checked if it is charging.
Usually this means there is a problem with the charging system. Stop and have the battery alternator checked. Makes sense if you think about it... Usually this means there is a problem with the charging system. Stop and have the battery & alternator checked. Makes sense if you think about it...
You have a charging system problem, have the alternator checked
You're right it could be a dead battery, the starter, the soleniod, or even the alternator. My guess try jumping the car or charge the battery.
Park brake light - might mean the e-brake pedal is slightly moved down to initiate light. Battery light - means the alternator is bad or battery bad etc. Parking brake light also comes on when the brake fluid runs low... This happened on a 2003 kia Rio the next day the car died it is either because of a bad battery, alternator or alternator fuse
yes i think cause the battrie runs of the alternator
could be a bad alternator or battery
Your alternator is not charging.
The alternator is overcharging due to the regulator malfunctioning. Replace the alternator.
ive put in brake fuild oil toped that up checked the battery level all ok still the battery light and hand brake light are still on...
The battery light stays on when the alternator is over or under charging. The red brake light stays on when the parking brake is set or the fluid is low. The abs light stays on when the abs computer detects a malfunction and sets a code.