The brake fluid level will gradually go down as the brake pads , brake shoes wear
Any DOT 3 Brake fluid
Any kind of DOT 3 brake fluid.
The red brake light indicates that the parking brake is on or that the brake fluid is low. Be sure to add the specified brake fluid if you add fluid. Also make sure that you don't allow any dirt to get into the brake fluid and don't overfill the brake fluid either.
any brake fluid that has a DOT 3 rating will work
Any brand fluid is good.
Any DOT 4 brake fluid. OEM specs.
Any fluid other than brake fluid will ruin the master cylinder, abs unit, brake hoses, and calipers.
Brake fluid in ANY vehicle should be flushed every two to three years depending on vehicle usage. Be sure to use the appropriate brake fluid for your Honda (don't just buy any brake fluid off the shelf.) I always flush my fluid when I replace the front disk pads. If your brake fluid is a very dark brown or worse, milky, change it immediately.
Just any heavy duty brake fluid will do, even regular brake fluid is fine, but I prefer the heavy duty grade. Dot 3 or Dot 4 brake fluid.
there is too much in the container If you filled the resevior with brake fluid PRIOR to replacing any of the brake linings, it will cause the fluid to "backflow" into the resevior, thus it will overflow and leak from the cap.
DOT3 regular brake fluid. Find it in any auto parts store.