Remove wheel
Re-install 2 lug nuts to hold rotor in place
Remove Parking brake cable
Remove brake fluid line
Remove caliper mouting bolts
Slide caliper off rotor Reverse procedure for install
Open bleeder screw at top of caliper
Allow brake fluid to start running from caliper
Have assistant apply brake pedal approx. 2/3 of complete travel
Hold and tighten bleeder screw
That procedure should remove air from caliper
To replace the rear corner lights on a 1998 Acura CL open the trunk. Find the brake light housing and disconnect the bulb. Install the new bulb.
Rear brake hose, but their are 2 models. 1 is RJ2 that has a banjo bolt.
how do you add transmission fluid on 98 acura cl 3.0
does anyone know where a starter is located on a 98 acura 3.5 RL
This all depends if you have the larger caliper on the '98. They should fit the rear no problem, but due to the larger caliper you would have to use a 1.25 inch adapter and grind the top of the caliper a little. Of course if you do not have the larger caliper they should fit. Just try it.
Use a large pair of needle-nose pliers to turn the piston back into the caliper. There is also a "special tool" available which helps push in while turning, but I have never had to use it.
No.Your 98 Honda Accord sun visor is only compatible with:98-03 Acura CL99-03 Acura TL98-02 Honda AccordA sun visor from a 98 Honda civic is compatible with:96-00 Honda CivicIf you still need help finding a sun visor you may want to read this blog post:http://www.oempartsguys.com/blog/how-to-find-your-replacement-sun-visor/
You may need to do an automated ABS bleed. You'll need a tech2 to do this. You'll have to take it to a shop or a dealership.
jack up sportage, remove front wheels, remove 2 bolts on rear side of each caliper and remove calipers.
Call a junkyard
how to change alternator in acura 1999 cl