0
to loosen belt tensiomer, u can use a 1/2 inch drive socket weench or buy proper tool for it the part of socket wrench that socket goes on, will fit in the square hole in front of tensioner once this is in place push wrench towards centre of vehicle enuff to remove belt then slowly release pressure on wrench
Add your answer:
Earn +20 pts
How do you change a serpentine belt on a 1996 cadillac concours deville?
loosen the tensioner bracket, remove old belt. replace with new belt. tighten with tensioner. job complete!
How do you loosen an AC belt tensioner on a 1996 Isuzu Rodeo?
I think it is the same as my 98 and you put a wrench on the bolt at the center of the tensioner pulley and push away from the belt.
How do you loosen a trailblazer drive belt tensioner?
The easiest way to loosen the tensioner is to use an automatic belt tensioner. This can be used on a serpentine belt which is connected to every pulley on the engine.belt.
How do you replace power steering belt on 1996 dodge neon?
Since There is no tensioner pulley you have to loosen your alternator.
Change belt on 1996 oldsmoblie 88?
Yeah u can all u have to do is loosen the belt tensioner and take the old one off put new one on then tighten tensioner
How do you change a AC belt on 90 Acura?
You need to loosen the belt tensioner. There is a large bolt that needs to be loosened in the center of the tensioner pulley. Then the small vertical bolt is turned in the direction to loosen the belt. After the tensioner is loose replace the belt and retension it.
How do you change ac belt on gmc Yukon?
Loosen the tensioner pulley. When the tensioner pulley is loose the belt will come off. Put the new belt on and tighten the tensioner pulley.
How do you release the belt on 2000 model gu patrol to remove alternator?
Loosen the tensioner pulley. The tensioner pulley will slide to the right. This will loosen the alternator belt. So it can be removed.
How do you loosen the serpentine belt tensioner?
Place a breaker bar on the lug/hole on the tensioner; then pry against the tensioner.
How do you change a serpentine belt in a 1992 Geo Prizm?
Loosen the belt tensioner and take the old belt off. Put the new one on and let the tensioner back in position. If you don't have a tensioner, you'll have to loosen the alternator and ac compressor adjusting bolts.
How do you install an alternator belt on a 95 Grand Am?
Loosen the tensioner pulley. Put the belt around the alternator pulley and the tensioner pulley. Move the tensioner pulley to the right until the belt is tight. Tighten the tensioner pulley.
2001 Ford Escort cam timing belt tension?
Loosen the tensioner bolt, let the spring loaded tensioner contact the belt. Then tight the tensioner bolt.
