0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
When installing an used motor on a 96 Pontiac Grand Am 3.1L is it best to leave the transmission on or is it better to remove the transmission do you recommend removing the transmission?
i did mine with the tranny in it only took me about 4 hours and theres alot less wires to deal with I recomend you leave in the tranny to save on labor it is not that difficult if you have a cherry picker(engin puller) and a weight transfer shackel
What weight of oil do you put in your 1998 Jeep Wrangler?
For what?? engine, tranny, transfer case.........???
What is the weight of transmission fluid in a Ranger manual transmission?
I have an 07, and ford calls for mercon iii / dex auto tranny fluid
What is the transmission oil weight for a 2000 H-D Electra Glide FLHT?
The tranny takes 80W90 gear lube
If the transfer case of a 1988 Blazer 4x4 is full of trans fluid does the rear transmission seal leak as well as the input seal on the transfer case?
Your transfer case is supposed to be filled with dexron III mercon for that year. The older transfer cases used gl-4 or gl-5 gear lube or 30 weight motor oil but the new process(yours) uses tranny fluid.
What is the Transfer fluid for f350 1989?
If you are talking about the transfer case on the transmission....it would be any brand of 90 weight oil.
Your dad accidentally put transmission oil either in the front referential or the transfer case tank. what do you do?
That all depends on the vehicle. Some transfer cases use tranny fluid. However on the differential you need to drain it asap and replace all the fluid with the proper weight of gear oil, usually 80-90 or 75-90.
What type transmission fluid for 5 speed manual transmission s10 pickup?
for models older then 1996 you use 90 weight gear oil. 1996 and up you use tranny fluid.
Can I put 90 weight in my 1993 jeep wrangler transfer case?
No. Automatic transmission fluid is the recommended fill.
How many quarts of tranny fluid goes in a Ford F-250 20007 with a manual 6 speed tranny?
Okay- Do not put automatic transmission fluid in a manual transmission! You need to put gear oil in a manual transmission. This is usually brown like oil and about 90 weight. Fill gearbox until the level is up to the fill hole but not flowing from the fill hole(as the fill hole is on the side of the gearbox).
What weight is transmission oil for a Harley Sportster?
AnswerMobil1 V-twin 20w-50 in my engine and Mobil1 75w/90 gear oil for the tranny will work fine, or buy the 32 oz's for the tranny at your HD dealer.Don't use trans oil.Sportsters use H.D. primary and transmission lube. You can also use 20/50 H.D. oil. Don't ever run your sportster without transmission oil!
What weight of transmission fluid is used in a manual tranny for a 1992 Chevy Silverado 1500?
That will depend on which Tranny you have there were 2 see links below.Manual Transmission,NV3500.....GLS [2]Manual Transmission,NV4500.....GLS [3]2. GLS is a special gear lube, GM part no. 12345349.3. Synthetic gear oil, GM part no. 12346190 or equivalent.For the NV3500 RecommendAMSOIL Synthetic Synchromesh Transmission FluidFor the NV4500 RecommendAMSOIL Synthetic Manual Transmission and Transaxle Gear Lube 75W-90 Hope This Helps ----
