0
Will a 40 watt per channel stereo play a speaker that rated at 50 watt minimum efficiently?
Wiki User
∙ 16y ago
It should, but I can't tell you how good it'll sound. Give it a try and see.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How does a stereo speaker use an electromagnet to produce sound?
An electromagnet drives the stereo speaker to provide the sound.
What is the effect of connecting a left and right channel of a speaker to the amplifier's right channel speaker terminal A and B and what will be the effect on the speakers and amplifier?
Connecting speaker leads to both right outputs, A&B, will only play the right channel of the sound (in mono) when both pairs of speakers, A and B are turned on. This won't damage the amplifier or speakers, but you won't be listening in stereo.
How useful are faux rock speaker systems compared to an average stereo?
The faux rock speaker systems will provide comparable sound quality to that of an average stereo speaker.
How do you wire stereo speaker wire to stereo plug?
in the red or white at the back of the speakers
I plan on putting in a aftermarket stereo is there anything that you need to do The new headunit will be 4 channel with 52 watts per channel is there any special wiring for the rear speaker 93 maxima?
Best thing to do is to purchase a wiring harness for your car and stereo. They are readily available on eBay from $15. Just search for 'wiring harness'.
Stereo was stolen you installed new stereo and speakers do not work?
make sure the speakers werent stolen first off then try new wires from the stereo to a speaker that you are sure works. if that speaker doesnt work take your stereo back
Where is the fuse or fuses for rear speaker wires of a 2002 suzuki esteem?
there is no fuse for your speakers the speaker wire runs from your stereo you might have a wire lose behind your stereo or may have shorted out some were from the stereo to the speaker or some times you might put some thing in the trunk and disconnect the wire from the speaker and if that just plug right back in to the speaker
What is a monoblock?
In reference to a car stereo amplifier it is a term used to descibe an amplifier that that has only a single-channel output, meaning you can only wire a single speaker to it unless you wire multiple speakers in a parallel or series circuit. In reference to a car stereo amplifier it is a term used to descibe an amplifier that that has only a single-channel output, meaning you can only wire a single speaker to it unless you wire multiple speakers in a parallel or series circuit.
To separate stereo audio signal from mono audio signal how can you do that?
If you have a mono signal then all stereo parts are gone and you really cannot get them back. The other way round is possible. You can add the left hand channel to the right hand channel and you get mono. like the guy said just reverse the left channel to right and right to left it will create a reveresed sound A.K.A mono. but why would you want to switch anyway? stereo is the peak of all speaker systems.
What does 2.0 2.1 and 5.1 digital sound mean when referring to speaker systems?
2.0 is stereo or 2 channel 2.1 is 2 channel plus sub woofer 5.1 is 5 channel ( 2 front speakers 2 rear and 1 centre) plus sub woofer
What is green white red black on a stereo four wire mean?
Black, ground. Red, battery plus. Green, right channel audio (plus black for the negative speaker lead), white, Left channel audio (plus black for negative speaker lead). This is assuming that you're talking about a car stereo you're trying to install.
Stereo Speaker Replacement?
form_title=Stereo Speaker Replacement form_header=Bring music to life in your vehicle with quality stereo speakers! What is the year, make and model of your vehicle?=_ What is the make and model of your stereo?=_ Did the stereo come with your car or did you have it replaced previously? = {(),Came with the Car,Replaced previously,Not Sure} What size speakers do you want?=_
