Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
It is audio output from the device to be connected to other equipment. Commonly color coded as White = Left channel and RED = Right channel.
A causal system:-is a system where the output depends on past and current inputs but not future inputs i.e. the output only depends on the input for values of .or in simple, the right side of sequence in a system is causal system!!
To record its sound, connect the left and right audio outputs to the line inputs on your M-Audio interface. Add a stereo audio track and then press record.
ideally "line out" on the receiver to "audio in" on the amplifier, left and right... If there isn't a "line out" use the the "audio out" but keep the volume on the receiver relatively low to prevent overdriving the inputs on the amplifier.
yes, if you have an analog output from the DVD player. The audio component will be at standard line levels and with the right connectors, can be routed to an audio recorder. You will need to check the manuals of each bit of equipment to get the right connecting leads.
Auxiliary inputs to a receiver are always stereo. If you have a 5-channel analog signal (from a computer or other multi-channel device), you will need a receiver with a 5.1 analog input. This has 5 separate RCA inputs for left, right, center, sub, and the two surround speakers. An analog output from a VHS-Hi Fi VCR can be input into the stereo aux inputs of a receiver and decoded to Dolby Surround, but this format is actually only 3 discrete channels, left, right, and surround. It has no separate information for the sub or the center channel, and has a limited bandwidth on the surround channel.
No. What you've described is a "function" if it's analog, or "combinational logic" if it's digital. The essential characteristic is: The output right now depends on the input right now. Whatever came before has no influence on what's happening right now. There's no memory. The jump to "computer" requires memory, so that properties that the inputs used to have in the past can affect properties of the output right now.
If this 'radio' is actually an audio receiver, with RCA inputs, no rewiring needed. simply purchase a 'Y' connector with a headphone jack on one end and RCA left/right on the other. This will allow you to output your iMac's sound into the receiver. If you're talking about an actual radio, i.e. something that does not accept RCA inputs, you could rewire it, but it wouldn't be easy. It would be easier to buy a set of amplified speakers.
Optimal input substitution refers to the process of determining the most efficient way to allocate inputs to maximize output, while minimizing costs. This involves finding the right combination of inputs to produce a given level of output at the lowest possible cost, taking into account input prices and output levels. This concept is often utilized in production decisions to achieve cost savings and improve profitability.
Auxiliary inputs to a receiver are always stereo. If you have a 5-channel analog signal (from a computer or other multi-channel device), you will need a receiver with a 5.1 analog input. This has 5 separate RCA inputs for left, right, center, sub, and the two surround speakers.An analog output from a VHS-Hi Fi VCR or the analog outputs of a DVD player can be input into the stereo aux inputs of a receiver and decoded to Dolby Surround, but this format is actually only 3 discrete channels, left, right, and surround. It has no separate information for the sub or the center channel, and has a limited bandwidth on the surround channel.So, the answer is NO.Read more: Is_there_a_way_you_can_add_5.1_audio_to_Auxiliary_Inputs
It means that the device has the ability to output 8 separate audio signals. DVD's and other recordings, if they have the ability to output 7.1 will generate different channels for front, side and back speakers. 7 (of the 7.1) stands for Left, Center, Right, Left Side, Right Side, Left Back, Right Back. These are all speaker placements in the room. The .1 (of the 7.1) stands for the Subwoofer.
By default, audio is not automatically output when you render. If you want sound, you will need to access the format settings by clicking on the text to the right of "Output Module" in the render que, add a checkmark in the box next to "audio," click "ok," then render it out.