I've found the manual to be inaccurate as far as setting the clock. To display the clock, hold down the right knob, then choose Freq or Clock. Push again to set. Easy.
To set the clock, push the source button until you're in standby mode. Hold the left knob down (volume ctrl) until menu comes up. Either push the left knob OR move the right up or down (can't remember which) until you see Clk Adj. Push the vol ctrl knob (I think). Then, the knob on the right goes left right for minutes/hours, and up/down for the other. I believe you can push the vol knob then once its set.
Press function button to display clock and change using arrows
Q: "How do you set the clock on a Jensen CR220X car stereo?"I just did this today (after searching here to find out how, to no avail). I figured it out.A: With the stereo off, the clock is still on. Press and hold "display" while using the TUNER knob to set the clock. Clockwise is minutes, counterclockwise is hours.It might work with the stereo 'on' too, but I didn't do it that way.--scotthttp://www.pleasurizer.com/An automotive adventure log for the intrepid Korb brothersAnswerQ: "How do you set the clock on a Jensen CR220X car stereo?" I just did this today (after searching here to find out how, to no avail). I figured it out.A: With the stereo off, the clock is still on. Press and hold "display" while using the TUNER knob to set the clock. Clockwise is minutes, counterclockwise is hours.It might work with the stereo 'on' too, but I didn't do it that way.--scotthttp://www.pleasurizer.com/An automotive adventure log for the intrepid Korb brothersAnswerQ: "How do you set the clock on a Jensen CR220X car stereo?" I just did this today (after searching here to find out how, to no avail). I figured it out.A: With the stereo off, the clock is still on. Press and hold "display" while using the TUNER knob to set the clock. Clockwise is minutes, counterclockwise is hours.It might work with the stereo 'on' too, but I didn't do it that way.--scotthttp://www.pleasurizer.com/An automotive adventure log for the intrepid Korb brothers
Clock radios can come in many varied types. It is not necessary for every clock radio to come equipped with stereo. If so desired, you can also get an AM/FM stereo with a clock radio
Setting the clock Use these instructions to set the clock. 1 Use MULTI-CONTROL to select CLOCK SET in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Press MULTI-CONTROL to display the setting mode. # Press DISP/BACK/SCRL to return to the previous display. 3 Press MULTI-CONTROL to select the segment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour—Minute As you select segments of the clock display, the selected segment blinks.
Google on the web the kenwood site with the model number. Pull down the pdf users manual.
To set the clock on a DEN-p6400 car stereo the system has to first be turned off. After turning off the system, hold the 'function' key until the display shows, then set the time by moving the arrows either up or down.
To set the clock on your ONN ONA13AV503 mini stereo, you typically need to locate the "Clock" or "Time" button on the device or its remote control. Press and hold this button until the clock display starts blinking. Then, use the arrow or navigation buttons to adjust the hours and minutes accordingly. Once you have set the correct time, press the "Clock" or "Time" button again to save the settings.
Use the clock on the aftermarket stereo that you should buy. My clock on my 92 always gets off so i just use the clock on my stereo.
Settings>Display>Clock>Analog
If you clock does not work in your Peugeot 206 when the stereo is plugged in, check the clock fuse. You should also ensure you do not have a wiring problem.
www.notdoppler.com
How do I change the clock setting on a 1997 Chevy Lumina with a CD stereo system?