There are no dedicated PC inputs in the rear of this Alba LCDW16HDF model. There are, however, an HDMI, a SCART connector, Component Audio/Video Inputs (YPbPr), a S/PDIF input (digital audio input), an RF Input to connect to an antenna or a coaxial cable, and finally, there are stereo audio line outs. The HDMI input is compatible with the DVI outputs found on more modern PCs-all that is required is a simple pin adapter. Picture quality can be excellent via this method.
The DB25 connector on the rear of a PC is used (if it has pins) to connect a printer or (if it has sockets) to connect a modem.
If your screen has turned blue on your Sony rear color projector, it may indicate an issue with the color settings or the input source. Try adjusting the color settings, checking the input cable connections, or resetting the projector to factory settings. If the issue persists, it may require professional repair.
The rear track of the 2014 Ford Transit-Connect is 5 ft. 2.4 in. (62.4 in.).
The rear track of the 2010 Ford Transit-Connect is 5 ft. 1.1 in. (61.1 in.).
The rear track of the 2011 Ford Transit-Connect is 5 ft. 1.1 in. (61.1 in.).
The rear track of the 2012 Ford Transit-Connect is 5 ft. 1.1 in. (61.1 in.).
The rear track of the 2013 Ford Transit-Connect is 5 ft. 1.1 in. (61.1 in.).
Only if the rear axle is a drive axle.
Conventional projection uses a projector in front of the screen, hence the term "front projection". It is also possible to project from the rear of a translucent screen, "rear projection". The problem with rear projection is that the image will be reversed left to right. Video projectors all have a menu setting that allows the image to be reversed before it is projected so the resulting screen image will be seen the right way round. The question mentions movie projectors suggesting a film projector rather than a video projector. Because a film projector is fully optical there are no electronic methods to reverse the image but it can still be done. Most projectors allow alternative lenses to be fitted. Using a specialist reversing lens will correct the image orientation but they are expensive. The image can also be reversed using a mirror in the light path. The mirror needs to be a front silvered mirror, one that has the reflective coating on the front rather than the rear as this avoids double images. This is much the same process as a reversing lens which has a mirror or prism inside the lens housing. Front projection distances tend to be large, with the projector being at the rear of a room. Rear projection rooms or cabinets are generally much shorter so wide angle lenses are often used to produce a large image from a short distance. A movie projector should have a short focus lens to reduce the required projection distance if possible. However, by using a mirror, the projection distance can be extended as the effective distance is the sum of the distance from the projector to the mirror and the mirror to the screen. Careful positioning of the projector and mirror will be needed and this is not as simple as it first appears. It may well be worth looking at dedicated mirror mounts to get the right result.
This Television is a rear projection CRT display. Front projection uses a self contained "Projector" usually hanging from the ceiling and shoots the image onto a fabric screen or wall. The projector in the RCA HD52W59 is actually inside the base of the unit and the projected image is bounced off of a mirror and onto the back of the screen There are many types or Rear Projection displays: CRT, LCD, DLP, LED and Laser.
There will be a "D" shaped multi pin plug on the plasma TV (at the rear or side)and would have the letters PC or an icon in the shape of a monitor. the lap top will have a "D" shaped multi pin socket. A decent computer shop will supply the lead required or internet. Get a HDMI Cable (after ensuring the laptop has one such port)