A coaxial cable has great uses in television antenna connections. TV satellite connections also use coaxial cables to connect decoders to the TV set.
Uses of Coaxial Cable?
Most times they are the same but a satellite signal needs to be carried by RG6 cable it is a heavier gauge wire then say RG59. Regular or analog cable signal is sometimes carried by RG59 but digital cable should use RG6. +++ The primary specification is not conductor size but the impedance and capacitance of the cable.
Just as with television or satellite , this is to transmit video signals
yes RG6 should be used exclusively for satellite hookups and digital CATV. RG59 is fine for analog CATV signals but will not support the higher bandwidth used for satellite signals.
rgu6
Satellite grade coaxial cable. This has a braid and foil sleeve to lower losses from dish to decoder. F plugs are twisted on at each end after trimming.
The fit a cable to an external aerial dish, one must check the satellite receiver to find the coaxial socket. Connect the cable from your satellite receiver to the external antennae socket.
Coaxial cable is usually constructed of either copper or aluminum and is used by cable television companies to provide service. It is also used for connecting the various components, which make up satellite communication systems.
Use T Connector
You should use an RG-6 cable RG-6 A type of coaxial cable with an impedance of 75 ohms and that contains an 18 AWG core conductor. RG-6 is used for television, satellite, and broadband cable connections. Source = Network+ Guide to Networks (Fifth Edition) by Tamara Dean
Coaxial one.