The smooth side of a solar pool cover should face down toward the water to help trap heat and prevent debris from entering the pool. The bubbles or air pockets on the cover should face up, as they help to capture and retain heat from the sun.
To remove algae from your solar pool cover, you can use a mild detergent and a soft brush to scrub the affected areas. Rinse thoroughly with clean water and allow the cover to dry completely in the sun before storing it. You can also consider using a pool cover cleaner specifically designed to remove algae.
A solar blanket is a thicker and more durable cover that helps retain heat and reduces evaporation in a pool, while a solar cover is a lighter and thinner option that primarily focuses on heat retention. Solar blankets tend to last longer and provide better insulation, while solar covers are more affordable and easier to handle for regular use.
A blue solar cover is often recommended as it helps attract more sunlight and heat the pool water effectively. White solar covers are also a good option as they reflect sunlight, reducing chemical loss and retaining heat well. Ultimately, the best color can vary depending on factors like climate, pool size, and personal preference.
You can use a solar cover reel to keep the solar blanket securely in place. Alternatively, you can invest in cover clips or straps that attach the blanket to the edges of the pool. Additionally, make sure to store the blanket properly when not in use to prevent it from blowing away.
Bubbles down
The bubbles need to go in the water, facing the bottom of the pool.
The smooth side of a solar pool cover should face down toward the water to help trap heat and prevent debris from entering the pool. The bubbles or air pockets on the cover should face up, as they help to capture and retain heat from the sun.
The reason could be caused from putting your solar cover back on the pool after you have just shocked the pool, the other reason could be that you are not placing your solar cover in the shade or covering it when you remove it from the pool. Both can casue the bubbles to deflate and or cause them to come apart from the solar cover. ANSW:: dragging the cover over the coping and across the deck will cause wear and breaking of the bubbles. Leaving the cover on the grass or cement deck will generate very high heat and destroy the cover in a very short period. k Answer: If you're bubbles have popped, maybe its time to try something new. Check out www.liquidpoolcovers.com for a nice and easy alternative to plastic bubble blankets that you won't have to fight with.
Down, if you hope to heat your pool with it the bubbles (in theory) will heat up from the flat side. As there is more surface area from the bubbled side more heat (energy) will transfer to the water. I've never read any studies myself but I've read differing opinions from people in other posts. Some state the the solar cover actually blocks the sun and less heat is transfered on sunny days and that it is more beneficial to use take the cover off. Personally I find that if you leave the cover on when not using the pool, except when it's raining, the temperature stays the highest. Ensuring the cover is clean and there is no standing water on top of the cover really helps.
Personally, I disagree with the logic used by those above. If the bubbles are up, there will be larger surface area to absorb the sun's heat. Increased levels of heat absorption seems more important than the rate of heat transfer, especially when considering the fact that heat transfer takes place almost instantaniously.****i have tried it both ways, bubbles up or down. makes little or no difference heating. with bubbles down, though, it is easier to clean debrie off the cover and keep it clean.
It's not possible to add optimizer plus to a pool with the solar cover on. You will need to remove the solar cover from part or all of the pool in order to put optimizer or other pool treatment products into your swimming pool water.
Useless
Personally, I disagree with the logic used by those above. If the bubbles are up, there will be larger surface area to absorb the sun's heat. Increased levels of heat absorption seems more important than the rate of heat transfer, especially when considering the fact that heat transfer takes place almost instantaniously.****i have tried it both ways, bubbles up or down. makes little or no difference heating. with bubbles down, though, it is easier to clean debrie off the cover and keep it clean.
No
yes
when you are in the pool