answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why is there no clutch pedal tension on your Mitsubishi?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace a clutch cable on a 1989 Mitsubishi Triton from foot peddle to motor?

To replace the clutch cable on a 1989 Mitsubishi Triton from the foot pedal to the motor you need to secure the vehicle with blocks behind all of the tires. Next, you will need to life up the frame to give you enough room to get under the vehicle safely. Remove the clutch cable from the motor first and follow it up to the foot pedal. Remove the cable from the foot pedal area and then attach the new cable.


How do you adjust the clutch on a 1994 Mitsubishi 3000 GT?

i belive the clutch adjusts automatically as its hydrolic not cable operated The clutch itself adjusts automatically, yes. However, you can adjust the pedal if your clutch is not engaging at the correct point as you press and release the pedal. Simply sit upside down in the seat (this is not as awkward as it sounds) and look at the rod that goes through the firewall connected to the clutch pedal. It will have a little nut on it that you can adjust with a wrench. That nut can work itself lose and make you feel like you have a failing clutch when really it's just the pedal.


How do you adjust clutch pedal on 2000 Saturn?

The clutch pedal cannot be adjusted


How do you know what is broken on a 94 Nissan Sentra with cable clutch when the clutch won't disengage gears and there is no tension on clutch pedal and heard a loud snap before tension lost?

It sounds like it is the clutch cable. I have a 94 Nissan Sentra and the clutch cable just broke. I have replaced one on an older Nissan, but it is still difficult for me to do on the 94. It is really hard to get the broken cable out.


Your 944 1985 4-cylinder clutch has to be pulled halfway up after shifting?

The clutch pedal has an assist spring and return spring. The assist spring tension must be adjusted to create a balance point at which the clutch pedal will over center and return to the fully disengaged position. It is also possible that the system may have air or the push rod attached to the pedal may be out of adjustment.


How do you engage the clutch on a car?

The clutch pedal.


How to Adjust clutch pedal height peugeot 307?

To adjust the clutch pedal height in the Peugeot 307 locate the adjuster bolt on the floor under the clutch pedal. Loosen the bolt and pull out the pedal to the proper height then tighten the bolt. To make the clutch pedal lower for the operator simply push in on the clutch pedal while the adjuster bolt is loose, then tighten the bolt.


Why does your clutch squeak when you press it?

The clutch pedal usually squeaks where the clutch pedal is mounted under the dash. The clutch pedal pivots at its mounting point so it probaly just needs some lubed sprayed on it.


Where is the 1995 accord clutch pedal switch?

A 1995 Honda Accord clutch pedal switch is located directly under the clutch pedal. This switch stops the car from starting with depressing the clutch. This helps avoid accidents.


How to adjust Clutch on 2000 ford f 250?

the clutch on a 2000 ford f250 is a hydraulic clutch there is no adjustment however check the bushing on the rod and pin on the clutch pedal this bushing wears out and you loose pedal if the pin is wrn ,you will have to replace the clutch pedal


Why do you have a soft clutch pedal on your 85 Pontiac fiero?

1. Air in the hydrulic clutch line 2. Bent aluminum clutch pedal


Brake fluid is running down the clutch pedal and when you mash the pedal the pedal remains on the floor?

Actually if the fluid is coming down the clutch pedal it is probably your clutch master cylinder going bad or the seal around it. No worries it is a cheap fix. If it is coming down the clutch pedal it has nothing to do with your brakes. Some people well most use brake fluid for the clutch.