The EGR valve is located on the left hand side of the engine on a 2006 Suzuki Forenza. It is above the ignition coils.
It is molded into the head cover.
Insufficient EGR (exhaust gas recirculation) valve. Suggest you replace the valve.
no gasket sealant needed. Just original gasket is fine.
The EGR valve on a 1998 Suzuki Sidekick is not repairable. It has no replaceable or user serviceable pieces or parts.
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
The 2004 Cummins does not have EGR.
I am not positive the 04 is the same as the 03, but on my 03, the EGR valve is located directly underneath the throttle body in the back. It is difficult to get to unless you remove the throttle body and intake collector tube as a unit.
does a 2004 grand am ,2.2 l have a egr valve
no the do not but some gaskets kits will come wit a egr gasket
* Remove the air intake duct from the throttle body and air filter housing * Detach the vacuum line from the EGR valve.Disconnect the EGR pipe nut * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * With a wire wheel buff the exhaust deposits from the EGR valve mounting surface on the manifold