where is the blower motor resistor in a 2003 Mitsubishi eclipse
The resistor is located on a duct behind the glove compartment and the glove compartment back.
You can find it attched to the condenser air quide. If you want to get to it, you will have to remove the glove box compartment.
the blower motor resistor is located behind the blower motor which is located behind the glove box there is clip wires you need to disconnect and then connect the new one.
the blower resistor is bypassed on high. a direct path to ground. if high is the only operational speed the resistor is bad.
It should be next to the blower motor.
A malfunctioning blower motor resistor will cause the blower motor not to work. When the resistor is bad the blower motors will not turn on.
2000 Mitsubishi eclipse 2000 Mitsubishi eclipse 2000 Mitsubishi eclipse
The Resistor is located on the outside of the blower motor. Have to remove the blower from under the glovebox to get to it. The Resistor is located on the outside of the blower motor. Have to remove the blower from under the glovebox to get to it.
The blower resistor has failed.The blower resistor has failed.
The blower motor fan cools the resistor so the resistor is usually located close to the blower.
The a/c heater blower motor resister is located in the vehicle on the passengers side inside the housing next to the blower motor...............Remove the blower motor resistor wire harness connector.Remove the blower motor resistor screws.Remove the blower motor resistor.