where is the blower motor resistor in a 2003 Mitsubishi eclipse
the blower motor resistor is located behind the blower motor which is located behind the glove box there is clip wires you need to disconnect and then connect the new one.
A malfunctioning blower motor resistor will cause the blower motor not to work. When the resistor is bad the blower motors will not turn on.
The a/c heater blower motor resister is located in the vehicle on the passengers side inside the housing next to the blower motor...............Remove the blower motor resistor wire harness connector.Remove the blower motor resistor screws.Remove the blower motor resistor.
Resistor is a separate unit from the blower motor
Generally the blower motor resistor is found close to the blower motor. It relies on the blower motor to keep it cool.
It should be next to the blower motor.
the blower resistor is bypassed on high. a direct path to ground. if high is the only operational speed the resistor is bad.
The blower motor resistor has failed.The blower motor resistor has failed.
Fig 15 Blower Motor ResistorNOTE: The blower motor resistor is located on the lower right side of the heater housing.REMOVAL# Remove lower right underpanel silencer/duct. # Disconnect wiring connectors on blower motor resistor. # Remove blower motor resistor retaining screws. # Pull blower motor resistor out of heater housing.
The 1991 Honda accord blower motor resistor is located on the firewall in the engine compartment. The blower motor resistor will be on the passenger side of the firewall.
The blower motor fan cools the resistor so the resistor is usually located close to the blower.