Take the fuse out or just unhook it from the modulator.
On the inside of the frame in front of the rear passenger wheel.
yes
Master Cylinder for brake and clutch are located next to the ABS unit on the firewall of the driver side in the engine bay. Slave cylinder for clutch is located on the bottom of the transmission.
The fuse for the abs in a 90 300ZX non turbo is located in front of the drivers side wheel, in the fuse box(marking on the lid will tell you which one it is).. it should be a 20 amp fuse.
In the 1990-1996 it should be in the trunk underneath the speaker on the right side in that area (under some interior panels)
The 1994 Chevrolet Astro Van ABS fuse is located in the fuse box. The ABS fuse will be in the second column, third from the top.
On a 1995 300zx N/A Coupe it is located behind the passenger seat under the plastic cover where the ABS assembly is. It is in a black box on top of the ABS unit under the black cover. There are two relays one has a raised tang on it that is the abs motor relay the other is the solenoid relay. Should be the same for 1990 to 1995 and maybe more and TT should be the same, do not know where the 2+2 relay is.
On the each wheel adjacent to the brake caliper
on the leftside (driver), behind the bumper.
The most common way is to remove the fuse itself for the ABS, your breaks will still work but the ABS feature will not run constantly and it will in turn operate without a dead battery. As far as a permanent solution I do not know for sure how to fix it, it is a somewhat common problem with the 300zx and power problems.
To reset the ABS light on a 1995 Nissan Pathfinder, disconnect the battery for 10 minutes. A Nissan dealer can also reset the light with a computer.