answersLogoWhite

0


Best Answer

it is not connected to a "switch," but a relay instead....it should be grounded to the core support next to the fan.....you may need to remove the passenger side headlight to get to it.....there is normally 1 or 2 wires coming from it....12V and switch signal from ECU (0V = off and 5V = on). To test the fan: disconnect the relay and connect directly to battery. To test relay: use external battery source like 3 AA in series. If you have no clue what I am talking about, then do not attempt this and seek professional help.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where is the Acura Integra cooling fan switch?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the 1999 Acura Integra cooling fan sencer?

1999 fan sencer for acura integra


Where is the 1995 Acura Integra fan switch located?

The fan switch on a 1995 Acura Integra is located on the dashboard. It is a part of the temperature control system.


Where is the fan relay in your 1997 Acura Integra?

The 1997 Acura Integra fan relay switch is located inside of the fuse box. The fan relay switch will be in the third column, second from the top.


Where is the 89 acura cooling fan switch location?

In the radiator.


What would keep the engine cooling fan from coming on in a 1990 Acura Integra GS?

The cooling fan is activated by a sensor, and possibly a relay. Most likely the sensor has gone bad.


Why wont your cooling fan come on foa an 1994 Acura integra?

i just had this problem you have to either change the fan relay switch or the sensor because they could be old so they ar not telling the fans to react to when the car is getting hot. but i changed mines and they come on now


Where is cooling fan relay located in 94 Acura Legend?

"Where is cooling fan relay on 94 acura legend?"


Why would the fan stop working on a 1995 Acura Integra?

Blown fuse, bad fan motor, defective thermal switch or a bad fan relay. Or check the coolant temp sensor.


What is the location of the engine cooling fan relay in a 1990 Acura Integra GS?

On engine block by the oil filter. Two wires land on temperature swicth, can jump out switch to see if fan comes on. The switch has a black rubber boot protecting it. Also check cooling fan by wiring battery right to fan to see if fan works. Air in system will also cause problems with fan coming on bleed air out bleeder by top radiator hose on tp of motor.


Where is the cooling fan relay for 91 Acura Legend srs found?

Where is the cooling fan relay for acura legend srs found


How do you find the engine fan sensor switch on an 1989 Acura Integra LS?

UNDER HOOD, DRIVER SIDE, FRONT ENGINE AREA, MOUNTED ON BOTTOM OF RADIATOR


Why does your 1990 Acura Integra run hot?

Running hot can be caused by several things. A bad water pump, stuck thermostat or cooling fan not working are the most common causes,