The best place to spray starting fluid into your 2007 Nissan is the air cleaner housing. Remove the cover to the air cleaner housing and spray the starting fluid directly into the air filter.
Throttle body
It uses the same resovoir as the windshield. The fluid is piped to the rear spray via tubing.
The use of starting fluid is not recommended. Spray the throttle plate with just a quick squirt.
most times starter fluid is sprayed through the air filter,if this is hard to get at you can disconnect one large air hose on engine side of air box and spray in there .remember to reattach hose after starting before driving off
"Starting fluid" is typically a spray that is used to help get an engine to fire-up. The spray needs to be directed into the air-intake to get to the inside of the engine. Release the clips that hold the air filter housing top down, and spray the fluid into the rubber housing that leads towards the engine. Your Owners Manual will have illustrated instructions on replacing the air filter that will guide you. See "Related Questions" below for more
IT COULD BE BECAUSE OF THE LINES BROKE OR THE CANTAINER SOMETIMES HAS A PLUG, TO TELL IT TO SPARAY
easiest and safest way to spray starter fluid is to spray it straight into air cleaner. you will not need to remove anything to do this and the engine will suk the fluid thru you really need to have the throttle body looked at ,as starter fluid is primarily for use in a diesel,not a gas engine
Starter fluid should be sprayed into the throttle body intake. Spray in small amounts, as the fluid is highly flammable. Any over spray could ignite if the engine backfires.
Most centipedes are not harmful just ugly so it makes them look harmful but to kill u have to get bug spray and spray it in the vents just keep doing that for about a whole week.
Spray a starter fluid into the intake to get the engine running. If the fuel pump does not start pumping, it is defective, or the fuel filter is clogged. These pumps are self priming.
use small bristle wire brush to unclog spray nozzle