Hundreds of nuts and bolts to torque. Please be more specific
i have a 2007 Camry with an I4 engine and it has 5 lug nuts per wheel. it should be the same for the 2009 Camry.
You do not use a wrench, you use a socket. It is probably a 3/4 inch, but may not be. Get your sockets out and try them until you find the one that fits. The lug nuts are not metric they are SAE. All other bolts & nuts on the car are metric.
The rear struts can be removed, on your 2005 Toyota Camry, by removing the nuts on each end of the strut. With the nuts removed the strut should slide off of the stud.
Usually Toyota uses 5 nut scheme.
The rear struts can be removed, on your 2005 Toyota Camry, by removing the nuts on each end of the strut. With the nuts removed the strut should slide off of the stud.
The 1989 Toyota Camry shifter linkage cables have adjustment swivel nuts on each end of the cable. Turning the swivel nuts will lengthen or shorten the shifter linkage cable.
take the door panel off, reach through and remove bolts/nuts, that secure it to the door. remove the bolts/nuts holding the other end to the door jam. Get a manual at an auto parts store for about $25 bucks, they explain well, and show pics. good luck
you have to get a tech at a dealership to do it. but they normally only do it for law enforcement (detectives) that have a letter from there department. Sucky I know. I work for Toyota and drive a Camry the alarm drives me nuts.
To replace the thermostat in a 2002 Toyota Camry the vehicle battery must be disconnected and the engine coolant must be drained. The radiator hose is connected to the thermostat housing and needs to be disconnected. Next, remove all bolts and nuts for the thermostat housing unit. The new housing unit can now be attached along with the parts taken off.
Remove old lug nuts replace with new one. I recommend buying lug nuts from toyota dealers. OEM lug nuts last longer than aftermarket.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.