8
Yes, a good painter can match the color.
No
no it doesnt have the RCA plugins in the stock unit and its almost impossible to workout with a wiring harness hookup to an aftermarket stereo.. ive been trying to work things out for about 5 months now and ive figured out the harness for 1994-now galant doesnt match with the stock harness so im just going to let best buy do it all
probably not. You have to do some major measuring of the length width and height to see if there is clearance, then check the brackets on the original bumper. if they dont match, try fabricating the old brackets onto the new bumper and you should be good to go. probably not. You have to do some major measuring of the length width and height to see if there is clearance, then check the brackets on the original bumper. if they dont match, try fabricating the old brackets onto the new bumper and you should be good to go. probably not. You have to do some major measuring of the length width and height to see if there is clearance, then check the brackets on the original bumper. if they dont match, try fabricating the old brackets onto the new bumper and you should be good to go.
Definetly not.
It's located on top of the valve cover - note that it's not a rubber PCV valve like a lot of other cars, it's fully metal, and costs a little more. I got my new PCV valve in Advance Auto parts (My local Autozone had one that did not match what was on my car.
There is probably nod difference in the integrity of these bumpers. As long as the rubber(decorative) parts match yours.
no it will not fit... cuz the holes where the bolt goes does not match....
yes but the emblems wont match
i am afraid this question you need vin # ,engine size, AT, and possibly a trip to the Mitsubishi dealer. I have had luck at a GOOD junk yard with getting an ecm that works in my vehicle even though the #'s off old ecm are not exactly the same. If you can get the old ecm out take it with you to the junk yard and see if they can match it. Also there is a place in Florida that repairs your ecm and sends it back to you. Do a Google search and you should be able to find them.
yes it does... however, the bumper must match the car. what i mean by that is, the sedan bumper will not fit the hatch. and vice versa. the clips are the same. the outer shell is shaped a little different. eg. the back bumper has a finger groove to make it easier to open the trunk. subtle differences like that.