what is torque on a chevy silverarado 4.8
There are no torque specs on 350 Chevy engines. Set solid lifter cams with cam manufacturers backlash specifications, set hydraulic lifter cams with 0 backlash plus 1/4-3/4 turns preload. To my knowledge you don't torque valves, you adjust them.Each one must be done individually.
69 Ft/lbs or 95 Nm
Rocker arm nuts are not torqued on a small block Chevy. If it's a hydraulic cam, set the nut for zero backlash on the base circle and preload the lifter 1/4-3/4 turns. If it's a solid-lifter cam, use feeler gages to set the backlash per manufacturer's specifications.
torque specs of what?
the torque specs for the 5.4 is 350ftlbs of torque
With the valve fully closed and the lifter fully at the down position, tighten the adjusting nut until there is no up and down travel in the push rod. Then tighten the adjusting nut 1/4 turn. This is only if you have hydraulic lifters. Tighten the rocker studs to 50 ft/lb of torque. These are the bolts holding the rocker assembly in place.
torque specs for an 89 chevy suburban
Torque specs
head torque specs for 2002 honda rancher
torque specs on 02 5.3
Torque specs for what part of the engine? There is torque specs for everybolt under the hood, some don't need to be used but some are critical