Use battery jumper cables
In the ground I would think, try a car battery and jumper cables and two rods then digbthe rods in the ground hook up jumper cables and see worms pop up when you see the worm unhook the cables be safe
You hook the jumper cables to the jump start posts that are under the hood on the driver side.
To hook up jumper cables, attach one cable from the negative post on one battery to the negative post on the other battery. (These usually are marked "-" and have a blacl cable attached to them.) Attach the other jumper cable from the positive post on one battery to the positive post on the other battery. (These usually are marked "+" and have a red cable attached to them.)
Hook up to the red and black jump start posts under the hood, driver side, on the strut tower.
You hook the jumper cables to the jump start posts under the hood on the passenger side.
Under the hood on the driver side are jump start posts. Hook your jumper cables to those.
If your car has a battery and it's dead, you can call a friend who has some jumper cables. You can hook the jumper cables up to his battery and your car's battery. It should create electricity that will renew your battery. If your car does not have a battery, you would have to push it or get it towed.
were did the tow truck hook the cables at ????????
If it is a twelve volt system then you probably need to hook up two jumper cables one to each if it is really dead. if not just hook up the battery on the driver side.
You hook the red and black jumper cables to the red and black jump start posts under the hood on the passenger side.
If you hook up the cables right (positive to positive, negative to negative) you should not do any damage. If you hook the cables up wrong, you risk damaging your cars electronics.