The oxygen sensor is located in the exhaust manifold before the catalytic convertor. If you look down between the radiator and the exhaust manifold a few inches before the exhaust pipe connects to the exhaust manifold you will see the Oxygen sensor. The sensor will have 2 wires coming from it and it kinda looks like a sparkplug stuck into the exhaust manifold. There is 2 nuts that hold the oxygen sensor into the exhaust manifold.
EGR (Exhaust Gas Recirculation) look for it to be attached to the exhaust manifold or a pipe from the exhaust manifold
Os sensors are always in the exhaust. Look either in the exhaust manifold or right after the exhaust manifold. HTH
Look on exhaust manifold.
its on the cylinder head. just like any exhaust manifold.
It is on the exhaust manifold. If you look down at your exhaust manifold there should be one plug sticking out of it. That's the O2 sensor.
Look on either the exhaust manifold or exhaust pipe.
The exhaust manifold needs to have a gasket in place to help seal the juncture between the manifold and the engine. After the gasket and gasket sealer are in place, tighten the bolts for the exhaust manifold. The exhaust pipe can then be replaced on the new exhaust manifold.
At the engine end of the upper rad hose. If you're looking straight onto the engine. Look for the exhaust manifold. Just left of the exhaust manifold you will see a coolant hose connect to what look like a adaptor. The thermostat is located under that housing.
The purpose of the exhaust manifold is to connect the exhaust ports on the cylinder head to the exhaust pipe.
exhaust manifold is where exhaust pipe hooks to engine!
In the exhaust manifold behind the engine.In the exhaust manifold behind the engine.