0
Add your answer:
Earn +20 pts
What are the tire pressures for a Citroen C15 van?
35 psi if im not mistaking
What are tire pressures for Fiat Scudo 120 Multi jet van 2008?
30psi
What are tire pressures for Fiat Scudo 120 Multi-jet van 2008?
30psi
What should tire pressures be on Citroen Relay Van?
0n a 2004 tyer pressures are 65lbs all round. on inside of drivers door.
1986 Toyota van the oil lightaltenator light and the radiator light stays on when key is on and engine is running Do these thing have a common connection?
It means that your alternator is on it's way out. Same thing happened to me on a Liteace.
What would the fuel consumption be for a Toyota liteace van 1991 2.0litre diesel engine 5 speed manual transmission 4x4?
I read somewhere from a Japanese website, that the 4x4 Liteace with 2-CT engine will return 5.8l/100 kms IF driven at 60km/h in top gear (5th). That would be in 2wd mode as well.
Where is the spare tire on a 2006 Toyota Sienna?
Under mid-pass-side of van. Cable crank lowers tire.
What are the tire pressures for a Renault Extra Van 1.9 diesel?
There are several tire sizes that the Renault Extra Van, especially depending on if it it an Extra Kangoo or a Traffic. The pressures range from F37/R40 on an Extra Kangoo Êwith 165 70R13 tires to F35/R38 on a Kangoo with 175 65R14 tires.
Dodge ram van b250 tire pressures?
On stock (XL rated) tires, 35psi front, 41psi rear
What is the correct tire pressures for the mpv 2000 tires?
Mazda MPV 2000 (van) standard tires should be set to 35 PSI.
Can the fixed front hubs on a 1987 Toyota Liteace 4WD van be replaced by manual free wheeling hubs from other Toyota 4WD's without modification?
What do you mean by fixed front hubs...?...the hubs should be free wheeling while you have the switches in the centre of the hub turned in one direction...and fixed when you have them turned in the other direction...
Where is the spare tire for the 2006 Toyota Sienna?
it's on the middle right side of the Van and it's on under neath. Also remove your floor mat and you will see the access nut to lower it.
